The Net-Brainer

The Net-Brainer (http://forums.netbraintech.com/index.php)
-   One-Skill-at-a-Time (http://forums.netbraintech.com/forumdisplay.php?f=18)
-   -   How to configure CRP and receive multicast stream in multicasting (http://forums.netbraintech.com/showthread.php?t=586)

Chris 10-23-2009 02:39 AM

How to configure CRP and receive multicast stream in multicasting
 
1 Attachment(s)
According to the topology above, configuring multicasting (PIM Sparse-mode) over Frame-Relay. Set R3 as the Candidate RP, and enable R4 to receive the multicasting stream of 224.4.4.4 for testing.

Chris 10-23-2009 02:44 AM

Knowledge Points
 
  • (config-if)#ip pim nbma-mode
    To enable multicasting in NBMA network
  • (config)#ip pim send-rp-announce Loopback0
Scope TTL group-list ACL-list Configuring the current router to advertise as the Candidate RP using Loopback interface
  • (config)#ip pim send-rp-discovery scope TTL
    Set the current as the RP Mapping Agent


All times are GMT -4. The time now is 06:44 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2009 NetBrain, Inc. All rights reserved.