Netbrain
Home NetBrain Product One-Skill-at-a-Time Search Mark Forums Read
Go BackThe Net-BrainerNetBrain Product How to access your network devices via jumpbox

Reply
 
Thread Tools Search this Thread Display Modes
Old 04-18-2013, 03:18 AM
NetBrainTAC NetBrainTAC is offline
Administrator
 
Join Date: Dec 2012
Posts: 510
Default How to access your network devices via jumpbox

Problem: Difficulty setting up a jumpbox to access network devices.

Solution:

This is the process to set up the jumpbox.

1. Determine the correct Jumpbox Server. The Jumpbox Server can be a Unix server, Linux server or even a router/switch The only requirement is that you can telnet/SSH to the Jumpbox from the Network Server using the standard username/password authentication.

2. Configure the Live Access methods. By default, NB will stop trying Telnet/SSH when ping fails, so you need to change this. Click the NB icon in upper left corner, choose Options, switch to Live Access tab, uncheck the option: If ping fails, donít try Telnet/SSH.

3. Configure the Jumpbox. From Ribbon menu, switch to Workspace tab, choose Settings in Shared Network Settings.

4. Do the Live Network Discovery with correct access methods.

Apllicable to: OE all version
Reply With Quote
Reply

Bookmarks

Tags
Operator Edition

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Forum Jump

All times are GMT -4. The time now is 05:04 AM.
Powered by vBulletin
Copyright © 2000-2010 Jelsoft Enterprises Limited.
Copyright © 2009 NetBrain, Inc. All rights reserved.