[JohnSmith]

Here is the log.


Ping [192.168.x.y] via Network Server(192.168.z.z); Successful
Failed:SNMP++ Get Error, SNMP++: SNMP request timed out (-5)

Send RO = [SmithSNMP][version:v2c] to [192.168.x.y] via Network Server(192.168.z.z)

Failed:SNMP++ Get Error, SNMP++: SNMP request timed out (-5)

Send RO = [SmithSNMP][version:v1] to [192.168.x.y] via Network Server(192.168.z.z)

Failed:SNMP++ Get Error, SNMP++: SNMP request timed out (-5)

Send RO = [SmithSNMP2][version:v2c] to [192.168.x.y] via Network Server(192.168.z.z)

Failed:SNMP++ Get Error, SNMP++: SNMP request timed out (-5)

Send RO = [SmithSNMP2][version:v1] to [192.168.x.y] via Network Server(192.168.z.z)

Failed:SNMP++ Get Error, SNMP++: SNMP request timed out (-5)

SSH to [192.168.x.y] via Network Server(192.168.z.z)

Connected Failed: Code 30016, Description Invalid username or password reported by server, or bad private key.

SSH to [192.168.x.y] Disconnected

SSH to [192.168.x.y] via Network Server(192.168.z.z)

Connected Failed: Code 30016, Description Invalid username or password reported by server, or bad private key.

SSH to [192.168.x.y] Disconnected

SSH to [192.168.x.y] via Network Server(192.168.z.z)

Connected Failed: Code 30016, Description Invalid username or password reported by server, or bad private key.

SSH to [192.168.x.y] Disconnected

SSH to [192.168.x.y] via Network Server(192.168.z.z)

SSH to [192.168.x.y] successfully via Network Server(192.168.z.z)

Return from Device:[Smith-PA-FW(active)>]

Sending "set length 0" command

Received:Smith-PA-FW(active)>set
Smith-PA-FW(active)> set length
Smith-PA-FW(active)> set length 0


Invalid syntax.




Sending "exit" command

SSH to [192.168.x.y] Disconnected

Any suggestiongs?

[Edel]

Please try adding 192.168.x.y to Network definition table.

Under Workspace Menu, go to Vendor Model drop down menu>Network Definition, Click Add button to define Device Type and Driver.



Then please try rediscover your device.

[JohnSmith]

It really worked! Thank you Edel!