Home NetBrain Product One-Skill-at-a-Time Search Mark Forums Read
Go BackThe Net-BrainerDiscover and Document Network Workspace Report


Thread Tools Search this Thread Display Modes
Old 02-24-2015, 05:06 PM
DJBORN DJBORN is offline
Join Date: Feb 2015
Posts: 4
Default Workspace Report

How would I run a report to find which devices on my network can't be accessed by SSH, or are running older iOS that do not support SSH?
Reply With Quote
Old 02-26-2015, 03:32 AM
admin admin is offline
Join Date: May 2009
Posts: 59
Default Re: Workspace Report

You can use Tune to verify whether the devices can be accessed via SSH and export the result as a CSV file. All the required credentials must be added into Network Settings correctly.

Please follow the steps below:

1. Login to OE Workstation -> Switch to Workspace -> Click Tune in Shared Network Settings.
2. Click Options to open Options of Tune Live Access window.
3. Select Try SSH only.
4. Start Tunning and wait for it completed.
5. Right click the blank space in the window -> Click Export Results in the drop box.
6. Save the results as a CSV file.

Attenstion: In the process of Tune, NetBrain will use the access mode and credentials in Device Settings first. They were stored in the Device Settings if NetBrain used them access to the device successfully last time. Please make sure the devices havenít been accessed via Telnet by NetBrain, otherwise you have to change the access mode to SSH in the device settings.
Reply With Quote


Network Design, Network Discovery

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Forum Jump

All times are GMT -4. The time now is 02:50 PM.
Powered by vBulletin
Copyright © 2000-2010 Jelsoft Enterprises Limited.
Copyright © 2009 NetBrain, Inc. All rights reserved.