Home NetBrain Product One-Skill-at-a-Time Search Mark Forums Read
Go BackThe Net-BrainerNetBrain Product L2 Dot11 Links Not Displaying Properly

Thread Tools Search this Thread Display Modes
Old 12-14-2016, 07:31 PM
peterp peterp is offline
Join Date: Dec 2016
Posts: 1
Default L2 Dot11 Links Not Displaying Properly


I have autonomous Cisco access points deployed in a point to multi point configuration.

Netbrain has found these devices and can log in via both SSH and SNMP.

However the client access points do not always show as connected to wireless root bridge via their dot11radio interfaces.

If I manually look at the client access point cdp table and drag it to the map it does map correctly. However, every time I auto update the map I lose this information.

How can I make sure these dot11 connections are automatically shown correctly on my L2 maps?

Reply With Quote
Old 12-15-2016, 04:36 AM
NetBrainTAC NetBrainTAC is offline
Join Date: Dec 2012
Posts: 526
Default Re: L2 Dot11 Links Not Displaying Properly

Hello Peter,

NetBrain uses CDP/LLDP and MAC calculation to build L2 topology and establish links between devices. Based on your description, it looks like there is an error while rebuilding L2 which prevent these links to connect to each other. We need more data to further investigate this issue so I suggest you to send an email to [email protected] and attach all problematic devices into a Qmap and one of our engineers will follow up with you.

Thank you.
Reply With Quote


Network Discovery

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Forum Jump

All times are GMT -4. The time now is 12:11 PM.
Powered by vBulletin
Copyright 2000-2010 Jelsoft Enterprises Limited.
Copyright 2009 NetBrain, Inc. All rights reserved.