Home NetBrain Product One-Skill-at-a-Time Search Mark Forums Read
Go BackThe Net-BrainerOne-Skill-at-a-Time How to enable a stable BGP network?

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 07-16-2009, 03:05 AM
Chris Chris is offline
Join Date: Jun 2009
Posts: 74
Default How to enable a stable BGP network?

According to the topology above, configure R1-R4 with BGP routing, so that1. R3 and R4 are in AS 11, R1 and R2 are in AS 111.
2. Peering relationship is established as shown: blue arrow means iBGP, red arrow means eBGP.
3. Each BGP router should start announcing routes to neighbor immediately without waiting for IGP protocol to learn of the same routes.
4. BGP is configured in a way that its peering relationship is most stable.
Attached Files
File Type: qmap BGP Basis.qmap (54.9 KB, 3 views)

Last edited by Chris; 07-16-2009 at 05:48 AM.
Reply With Quote



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Forum Jump

All times are GMT -4. The time now is 07:19 AM.
Powered by vBulletin
Copyright 2000-2010 Jelsoft Enterprises Limited.
Copyright 2009 NetBrain, Inc. All rights reserved.