[Erick]

I have a router or three that the only method of access is via NAT. Trying to get this into NetBrain is not as straight forward as other devices. How do I model a device with an IP address which does not exist on the device?

[David.C]

Originally Posted by Erick

I have a router or three that the only method of access is via NAT. Trying to get this into NetBrain is not as straight forward as other devices. How do I model a device with an IP address which does not exist on the device?

Hi, Erick,

To access a device, you can manually edit the management IP address in Device Settings window.

1. Right-click a device and select Device Settings. The Device Settings window opens.
2. Click the Management IP field and enter a new one as desired.
3. Click the OK button.

[Erick]

I tried that yesterday and then did Check Device. NetBrain only polled the devices listed in the drop down menu for interface list.

I originally added this device by importing the configuration text file. Does this require me to remove the device and re-add in a different mannor?

[David.C]

Originally Posted by Erick

I tried that yesterday and then did Check Device. NetBrain only polled the devices listed in the drop down menu for interface list.

I originally added this device by importing the configuration text file. Does this require me to remove the device and re-add in a different mannor?

Hi, Erick,

I tested it and it works. You can try this way:

Firstly, modify the management IP and click Apply, then OK.
Next, re-launch the Device Settings window and check the device again.

For any questions, please let me know.