|
|
|
|||
|
|||
![]()
Usually NB does a good job showing everything related to an interface but I came across this one:
interface Vlan123 description bogus edited interfacs bandwidth 43000 ip address 192.168.1.1 255.255.255.252 no ip proxy-arp ip pim sparse-mode ip route-cache flow ip ospf authentication-key 7 123456789 load-interval 30 service-policy output Parent_policy ! policy-map Parent_Policy class class-default shape average 43000000 service-policy Child_Policy ! policy-map Child_Policy class Voice priority 4000 class Routing_Protocols bandwidth 100 class Call_Signaling bandwidth 100 class Network_Management bandwidth 100 class MCAST bandwidth 350 class Video_Services bandwidth 100 estimate bandwidth drop-one-in 100 delay-one-in 50 milliseconds 250 .... NetBrain only shows the part in blue within the pop-up window. The additional, not everything, portion in red does not show. his child service policy and related ACLs do not show. Can y'all look into this one please? thanks, erick.. |
|
|||
|
|||
![]()
Hi, Erick.
The configuration tip windows uses Design Reader Filters to filter out the configuration files. When your mouse hovering an interface, it shows the basic interface configuration only. To see the detailed QOS configuration, in this case, you should use Design Reader, and select the filter: Router > Quality of Service > Class-based WFQ. Let me know if you still have problem on this. Thanks. David |