|
|
|
|||
|
|||
![]()
Hi
I am using Personal Workstation Edition Version 4.1 November 09 2012 and when I try and add a cisco router via telnet i get the following error message: Telnet to [xxx.xxx.xxx.xxx] via local Telnet to [xxx.xxx.xxx.xxx] successfully via local Return from Device:[Username@ACSServer:] Sending Username:donovane Return from Device:[Password@ACSServer:] Sending Password:****** Return from Device:[Mompou#] Sending "enable" command Return from Device:[Mompou#] Sending "terminal length 0" command Return from Device:[Mompou#] Sending "show running-config" command Received:Mompou#show running-config Building configuration... Sending "exit" command Telnet to [xxx.xxx.xxx.xxx] Disconnected add Mompou failed,ip:xxx.xxx.xxx.xxx,cost:15 I have no idea why it failed i have added other routers about 5 of them already added all via telnet Any ideas? |
|
|||
|
|||
![]() Quote:
Hi, You may hit the license limitation, PE supports 12 network devices, you can have a look at if it is the issue. Hope it helps. Thanks Gerry |
|
|||
|
|||
![]()
Hi
I can only count 5 devices in my map that I have added. When I look at license under about NetBrain Workstation i see the following: Evaluation copy Username: xxxxx@xxxx.xxx Days left till license expiration: unlimited Maximum network size: 12 Product ID: NBDPE4D1-117340 if this is the case i can still add 7 more devices. Last edited by Doesterhuizen; 04-12-2013 at 03:59 AM. |
|
|||
|
|||
![]() Quote:
Thanks Gerry |
![]() |
Bookmarks |
Tags |
Network Discovery, Network Troubleshooting, Personal Edition |
Thread Tools | Search this Thread |
Display Modes | |
|