Netbrain
Home NetBrain Product One-Skill-at-a-Time Search Mark Forums Read
Go BackThe Net-BrainerOne-Skill-at-a-Time Network Resiliency testing

Reply
 
Thread Tools Search this Thread Display Modes
Old 01-26-2019, 02:48 PM
bkarim bkarim is offline
 
Join Date: Jan 2019
Posts: 1
Default Network Resiliency testing

Hi,
I am new to netbrian and still discovering its features. I have been asked to find out if we can somehow test the resiliency without shutting down the interface or the device physically to know if the DR is working. This will be required for testing Nexus, 6500, with BGP and ospf.

Example would be if we have 2 paths from device A to Device D. i.e

ABD & ACD where primary path is ABD. can we test if B stops working would the traffic follow the path ACD or not without making a change to network.

I have seen some documentation where we can setup and can see the traffic path with live packet transfer/capture. If possible can we apply the same for the resiliency testing ?

Kind Regards.
Reply With Quote
Old 01-30-2019, 10:35 PM
NetBrainTAC NetBrainTAC is offline
Administrator
 
Join Date: Dec 2012
Posts: 505
Default Re: Network Resiliency testing

Hi,

I am sorry I am not sure which document you are referring to, and which version you are running.
I have the following option based on your description, and the guide links are based on version v7.1a

1. Calculate the path with option “L3 Active Path” set, which makes the L3 path calculated by using live data from the devices.
Pleaser refer to these links for guidance:
https://www.netbraintech.com/docs/ie...ing-a-path.htm
https://www.netbraintech.com/docs/ie...h-settings.htm

2. Traceroute the actual packet transfer, and then Map traceroute result on the map.
How to perform traceroute in Netbrain and map the result: https://www.netbraintech.com/docs/ie...traceroute.htm

3. Use Qapps to monitor, the following Qapp may help to test resiliency:
Overall Health Monitor
Monitor OSPF Neighbors
Monitor OSPF Running Status
Monitor QoS along Path

How to run Qapp: right click on a map and select Run Qapp.
Reply With Quote
Reply

Bookmarks

Tags
BGP, Network Design, Network Discovery, Network Troubleshooting, One-Skill, OSPF

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Forum Jump

All times are GMT -4. The time now is 01:53 AM.
Powered by vBulletin
Copyright © 2000-2010 Jelsoft Enterprises Limited.
Copyright © 2009 NetBrain, Inc. All rights reserved.