Netbrain
Home NetBrain Product One-Skill-at-a-Time Search Mark Forums Read
Go BackThe Net-BrainerNetBrain Product How to resolve trial license activation failure

Reply
 
Thread Tools Search this Thread Display Modes
Old 03-29-2010, 02:15 AM
QuestionForTAC QuestionForTAC is offline
 
Join Date: Nov 2009
Posts: 30
Default How to resolve trial license activation failure

For version PE, AEv2.3.J

Possible reasons:
1. Problems with your Internet connection.

Error message:
(System error info), please check the Network connection.
Solution:

Make sure you have access to the Internet and the NetBrain website (http://www.netbraintech.com/register...nt-edition.php for AE, https://online.netbraintech.com/licsvc/order/DownloadProduct.aspx?nbversion=4&entryway=1 for PE ) via Microsoft Internet Explorer (IE). If not, please check IE security settings and Windows firewall settings, or check with your system administrator.

Reply With Quote
Old 03-29-2010, 02:16 AM
QuestionForTAC QuestionForTAC is offline
 
Join Date: Nov 2009
Posts: 30
Default Re: How to resolve trial license activation failure

Possible reasons:
2. There is username/password authentication in the proxy.

Error message:
Proxy Authentication Required, please check the Network connection.
Solution:
l Disable the username/password authentication.
l Use another PC which can access the Internet directly.
Reply With Quote
Old 03-29-2010, 02:16 AM
QuestionForTAC QuestionForTAC is offline
 
Join Date: Nov 2009
Posts: 30
Default Re: How to resolve trial license activation failure

Possible reasons:
3. There isn’t a physical NIC installed on your PC.

Error message:
“Invalid Parameter”
“Failed to get network card address”
Solution:
l Check if the physical NIC is disabled. If yes, enable it.
l Use another PC with a physical network adapter installed.
Reply With Quote
Old 03-22-2014, 07:38 AM
timxpro timxpro is offline
 
Join Date: Mar 2014
Posts: 1
Default Re: How to resolve trial license activation failure

Quote:
Originally Posted by QuestionForTAC View Post
Possible reasons:
3. There isn’t a physical NIC installed on your PC.

Error message:
“Invalid Parameter”
“Failed to get network card address”
Solution:
l Check if the physical NIC is disabled. If yes, enable it.
l Use another PC with a physical network adapter installed.

If u are using a laptop, most check in the BIOS for Power Saver on LAN and disable that.If is enabled, your NIC will only show up when connected and even when you connect the cable the error of NetBrain is still there.

This solved my problem !
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Forum Jump

All times are GMT -4. The time now is 04:06 AM.
Powered by vBulletin
Copyright © 2000-2010 Jelsoft Enterprises Limited.
Copyright © 2009 NetBrain, Inc. All rights reserved.