Home NetBrain Product One-Skill-at-a-Time Search Mark Forums Read
Go BackThe Net-BrainerNetBrain Product [Q&A]Monitoring problem on bandwidth usage

Thread Tools Search this Thread Display Modes
Old 04-18-2013, 11:20 PM
NetBrainTAC NetBrainTAC is offline
Join Date: Dec 2012
Posts: 528
Default [Q&A]Monitoring problem on bandwidth usage

Q: The bandwidth usage is incorrect.

We calculate the bandwidth usage based on the interface bandwidth, which in retrieved through SNMP. This is actually the same data as you set for the interface using the bandwidth command. You can have a look at if the bandwidth command is set correctly.
In order to make NetBrain retrieve the new bandwidth, you can right click on the device - > Select the Properties… option > Switch to the Interface tab and navigate to interface, modify the value of MIB index to “-1” and then start the monitor again.
Reply With Quote


Consultant Edition, Operator Edition

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Forum Jump

All times are GMT -4. The time now is 02:59 PM.
Powered by vBulletin
Copyright © 2000-2010 Jelsoft Enterprises Limited.
Copyright © 2009 NetBrain, Inc. All rights reserved.